Does Slow Cooker Need Water, and WHERE to Pour it?

Author:

Published:

Updated:

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

The short and sweet answer to the question “Does a slow cooker need water in the base?” is NO. It can even damage or destroy the whole device if you put water in a crock, so be careful not to put it in the space between the base and the vessel, even by mistake.

So, the question ‘Is it necessary to add water?’ is answered, and you can go, right? Well, I would suggest not leaving your crockpot yet, since an answer without a clear rationale is like no answer at all.

Few quick rules to follow:

You don’t have to put water in your slow cooker base since it is heated by coils hidden in its core and not by hot water.
Read the recipe carefully every time, so you don’t make an unnecessary mistake, and pour water into your slow cooker’s base, which would damage the slow cooker.
Most recipes call for water to be added to other ingredients to gain volume and/or cook easier and more even – soups, sauces, reductions, and so on.

How about we? It sounds good for your hours on low slow-cooker meals. Ok, so let’s go and put your food into the slow-cooker.

How does a slow cooker works?

You might know that I have already written quite a comprehensive article on how a slow cooker works, but let me make a quick reminder.

If you don’t have a slow cooker consider getting this one from Amazon.

You have three major parts:

Heating base – mainly for providing and regulating the heat that is delivered via metal coils

Cooking pot or vessel – houses the through the entire cooking process and is sometimes used for storing

A lid – you need a way to cover that bad boy and keep the heat and taste in the pot.

Metal coils are powered, create heat, and it’s being transferred to the closed cooking pot.

Below you can find an almost exact drawing of the process.

Slow cooking process

 

Besides the heating coils, there are also the electronic parts of the slow cooker, which are essential for it to work correctly.

Now imagine that you pour the water into the space between the base and cooking pot. What would happen? 

Well, a couple of things that depend on the state of base. If turned on, you would get tons and tons of smoke and most likely short-circuit in your slow cooker. 

If you would have the slow cooker turned off at the beginning, then nothing at first. But as soon as it turned on, you would most likely get a short-circuit, maybe even fry yourself a bit with electricity.

So beware and be careful!

What happens when you put water in the base of your slow cooker?

As soon as water touches the heating coils, it starts vaporizing. It depends on the amount of water, but most likely, you are immediately covered in a massive cloud of hot vapor.

This extremely hot vapor can do some severe damage. I am talking about burns on your hands and face, also, if you are not wearing glasses, your eyes are in immense danger.

The situation is similar to the lifting lid on a slow cooker. Believe me; I can tell you from experience that this is something you do not want to experience.

So we got a hot cloud of danger, anything else?

Yep, in most cases, you also have quite a few sparks. You are pouring liquid on a hot heating coil with electrical wiring.

It is easy for water to get to the slow cooker and overload the system. Best case scenario, you only damage the slow cooker, burn its wiring, blow a fuse, and that will be it.

Worst case scenario?

Well, fire. Yes, it is more than likely that the whole slow cooker would catch on fire in the worst scenario. I suggest trying to avoid putting water in a slow cooker base.

How much liquid do you need in a slow cooker?

Slow cookers are a great way to avoid the hassle and preparation needed for traditional cooking methods. With so many slow cooker recipes that call for liquids, it can be tricky to figure out how much liquid is needed.

Start with enough liquid in the pot itself – The amount of liquid required will vary depending on the recipe and the ingredients being used, but generally speaking, you’ll need at least half the amount of liquid in the recipe. This will show you how much water you are going to need approximately.

Maybe it sounds a bit strange, but my advice is based on the assumption that your slow cooker is not the same size as the one used in a recipe.

Water is essential for slow cookers. Without enough water, your food will not cook evenly and may become dry and/or burnt. When adding water to a slow cooker, be sure to add it incrementally so that the water does not overflow from the cooker.

Also, slowly pouring the liquid into the pot ensures you won’t dilute the mixture too much. This is a bigger problem than it might seem at first, as you don’t want to deal with thickening the sauce afterward.

On the other hand, if your aim is soup, pour your heart away up until is the pot of a slow cooker a two-thirds full.

My last suggestion would be NOT to overfill the slow cooker pot if possible. This can lead to all kinds of trouble like food burning on the bottom, the cooker not heating evenly, its contents spilling everywhere, or food not cooking through evenly.

Should food be covered with liquid in a slow cooker?

According to the University of Minnesota, the food should be covered if you cook meat or poultry. The critical part here is the meat factor.

As the slow cooker cooks under a simmering point and heats up slowly, there is little movement and shifting inside the pot. So covering the meat in liquid is essential here, as it provides even heating and ensures that the meat cooks evenly on all sides.

Now with the vegetables, it is an entirely different story. One of the great things about using a crock pot for vegetables is that you don’t need much water. Veggies are much lighter than pieces of meat, so they tend to ‘move’ around the pot of a slow cooker much more often. Their weight ensures they move and turn to provide even cooking from all sides.

To ensure I won’t leave you hanging, you should cut the vegetables into smaller pieces. You can imagine that the bigger the chunks are, the harder it is for them to ‘float’ in a crock pot.

Additional information

When using a slow cooker, the question of whether to add water in the base is a common one, and it depends on what you’re cooking. Slow cookers are versatile appliances, suitable for various dishes such as stews, roasts, and braises. In some cases, you need to add water or another type of liquid to the slow cooker to prevent the food from drying out and to enhance the flavor.

For instance, when cooking raw meat like chicken thighs or a pork shoulder, it’s necessary to add a small amount of liquid like broth or a cup of water to the crock pot. The liquid added at the beginning will release and prevent the meat from sticking to the bottom, ensuring the best results.

Additionally, adding liquid can increase the cooking time, particularly when cooking on the low heat setting for extended hours.

On the other hand, there are certain recipes that don’t require water in a crock pot, like cooking a pot roast or brisket. The meat releases its own juices as it cooks, which will cover the bottom and prevent burning. Placing vegetables on the bottom can also help prevent food from sticking.

However, it’s essential to use less liquid or even none when following these recipes to avoid diluted flavors or overly watery results. Nevertheless, it’s vital to check your food’s internal temperature using a food thermometer to ensure it reaches the suggested cooking time and guarantee food safety.

In summary, the presence of water or liquid in a slow cooker depends on the type of dish you’re preparing. Adding water or broth is often necessary when cooking raw meat and vegetables, especially if you’re using the low setting for extended hours.

However, for dishes like pot roasts and briskets, it’s best to use less or no extra liquid to achieve the desired flavors and textures without compromising the outcome. Regardless of what you’re cooking, always remember to monitor the food’s progress, and never add extra liquid every time you take the lid off, as it can increase the cooking time and potentially result in overcooked or watery dishes.

So to recap:

You don’t have to put water in your slow cooker base since it is heated by coils hidden in its core and not by hot water.

And that’s it.

Also, you enjoyed your time here, and I look forward to meeting you in my other articles.

Have a great day and happy cooking.

About the author

One response to “Does Slow Cooker Need Water, and WHERE to Pour it?”

  1. Sharon Jackson Avatar
    Sharon Jackson

    Thank you. Useful information. 👍😊

Latest posts

  • Best Chefs Knife Under 50

    Looking for that perfect chef’s knife, but the bank account is giving you a hard side-eye? Trust me, I’ve been down that road too! After digging deep into the world of kitchen cutlery (and slicing through way too many cliche knives), I uncovered some hidden gems. In this blog post, we’re going to delve into…

    Read more

  • Best Cutting Board For Japanese Knives

    Are you grappling with maintaining the razor-like sharpness of your Japanese knife on a regular cutting board? You’re not alone. It’s common knowledge amongst culinary enthusiasts that Japanese knives aren’t just everyday blades; they’re meticulously crafted works of art begging for appropriate care. The right cutting board can truly be a game-changer in preserving their…

    Read more

  • Best Blenders For Pureeing Food

    Ever had those moments where your kitchen blender just seems to give up when it comes to pureeing food? Believe me, I get how frustrating that can be. After spending many hours researching and assessing countless models available today, I’ve unearthed some truly stellar blenders. These champs, like the Vitamix E310 Explorian Blender and Ninja…

    Read more

Available for Amazon Prime